845.679.2862 | Hours: MON-SAT 7-6 | SUN 8-5 | 84 Tinker St. Woodstock, NY 12498 | Get Store Directions
LOG IN ACCOUNT
Glue PVC, ABS, & CPVC
Medium-bodied blue cement very fast-setting. Hot cement formulated for wet conditions and/or quick pressurization and fast installation on all schedules and classes of PVC (Polyvinyl Chloride) pipe and fittings up to 6" diameter with interference fit. Recommended for potable water, sewer, and DWV (drain waste vent) applications with application temperature of 40 F to 110 F (degree Fahrenheit)/4 C to 43 C (degree Celsius). Low VOC (Volital Organic Compound) Meets ASTM (American Society for Testing and Materials) D2564.
For ABS, PVC, and CPVC pipes and fittings. Heavy bodied, clear for all pipe Schedules to 12". Apply at temperatures 40 deg. F. to 90 deg. F. This product is not code approved for plumbing use.
Regular cement for PVC pipe and fittings. Clear, recommended for pipe up to 3" diameter. May be used for DWV and Schedule 40 pressure lines for potable water. Flows freely and sets up quickly. Apply at temperatures 40 deg. F. to 90 deg. F. NSF and UPC approved. Exceeds ASTM D-2564.
Regular cement for PVC pipe and fittings. Clear, recommended for pipe up to 3" diameter. May be used for DWV and Schedule 40 pressure lines for potable water. Flows freely and sets up quickly. Apply at temperatures 40 deg. F. to 90 deg. F. NSF and UPC approved. Exceeds ASTM D-2564.
Medium-bodied cement recommended for use on CPVC pipe and fittings up to 6" in diameter. Fills gaps in larger sizes and looser fits. Apply at temperatures 40 deg. F. to 90 deg. F. NSF and UPC listed. Exceeds ASTM D-2846, F-493.
Extra Special Medium Black ABS Solvent Cement is recommended for solvent welding non-pressure ABS pipe and fittings up to 6" with interference fit. ABS Solvent Cement is formulated for hot, arid climates. Can be used for sewer and drain, waste and vent systems. Product is compliant with SCAQMD (South Coast Air Quality Management District) Rule 1168 and OTC (Ozone Transport Commission) regulations for Volatile Organic Compound emission levels. Product is NOT for use in a system using or being tested by compressed air or gases.
Green label can. Heavy-bodied clear cement recommended for use on PVC pipe and fittings up to 12" diameter for Schedule 40 and Schedule 80 potable water pressure pipe, gas, conduit, drain waste, and vent pipe. Flows freely and provides a thick layer of cement on the pipe. Helps to fill gaps in larger diameter pipe and loose fitting joints. Apply at temperatures 40 deg. F. to 100 deg. F. NSF listed. Exceeds ASTM D-2564.
Green label can. Heavy-bodied clear cement recommended for use on PVC pipe and fittings up to 12" diameter for Schedule 40 and Schedule 80 potable water pressure pipe, gas, conduit, drain waste, and vent pipe. Flows freely and provides a thick layer of cement on the pipe. Helps to fill gaps in larger diameter pipe and loose fitting joints. Apply at temperatures 40 deg. F. to 100 deg. F. NSF listed. Exceeds ASTM D-2564.
Very fast setting. Blue PVC cement formulated for wet conditions and/or when quick pressurization is needed. To use, remove water and moisture from joints and fittings-use a primer. When curing time is not available, Rain R' Shine is the product to use. 1/2 pint PVC Rain R' Shine. NSF and UPC listed. Exceeds ASTM D-2564.
Medium-bodied clear cement for use on all schedules and classes of PVC pipe and fittings up to 6" diameter with interference fit. Recommended for potable water, pressure pipe, conduit and DWV applications with application temperature of 40 F (degrees Fahrenheit) to 110 F/4 C (degrees Celsius) to 43 C. Low VOC (Volital Organic Compound). Meets ASTM (American Society for Testing and Materials) D2564.
A medium-bodied green colored cement recommended for use in joining ABS to PVC in nonpressure transition joints. Formulated for use in pipe up to 6" in all schedules. Flows freely and covers with a thicker layer than regular PVC. Apply at temperatures 40 deg. F. to 100 deg. F. NSF and UPC listed. Exceeds ASTM D-3138.
Handy pack includes: One 4 oz. can of regular PVC cement for PVC pipe and fittings. Clear, recommended for pipe up to 3" diameter. May be used for DWV and Schedule 40 pressure lines for potable water. Flows freely and sets up quickly. Apply at temperatures 40 deg. F. to 90 deg. F. NSF and UPC approved. Exceeds ASTM D-2564. One 4 oz. can of purple primer for PVC pipe and fittings. A purple-tinted aggressive primer recommended for use on PVC pipe and fittings, all Schedules, and diameters. Formulated to remove surface dirt, grease, and grime as well as soften the pipe surface to allow for a fast, secure, and permanent solvent weld. For use in areas where code calls for verification that a primer has been used. NSF and UPC listed. Exceeds ASTM F-656.
